Tloušťkoměr MG-405


• It was developed for precise measurements of varnish coating thickness, plastics - isolating layers on steel, aluminium, brass or copper tin plate galvanic layers. 
• Two ways of measurement:
1.      Nonmagnetic coating on magnetic surface 
2.      Isolating coating on conducting surface 
• Automatic detection of the type of surface.
• In case of varnish measurement on galvanised sheet, there is a possibility of measurement of varnish coating thickness together with the zinc coating thickness or the varnish coating exclusively. 
• One probe enables measurements on various surfaces.
• The result of the measurement is displayed in mm or miles (1/1000 inch).
• High accuracy is ensured by precise calibration and storing of the probe characteristics in the product’s memory. 
• For unusual thickness of the surface 3 point calibration on freely chosen thickness samples is possible. 
• 3 characteristics of calibration can be stored in the meter’s memory. 
• There is a possibility to set a maximal and minimal value, exceeding is signalised on the display. 
• Built in real clock and date function. 
• Internal memory up to 240 results with time and data of a particular result.  
• Possibility of extending the internal memory up to 450 or 950 results at the request. 
• Maximal, minimal and average values of measurements may be found from the results stored in the memory.
• Possibility of connecting with a PC by RS-232 output or with standard printer with use of interface. 
• Powered by battery or power adapter. 
• 24 month warranty.
• CE certificate.
Prohlášení o shodě (MG-405)/ Declaration of Conformity (MG-405)

  - Manual doc (comming soon)   - Czech version

 Vstup do poptávky